Standard Abrasives™ S/C Slotted Cloth Disc 704586, 1 in x NH, 120,100/Carton, 1000 ea/Case

When you need a coated abrasive product with a lighter touch than a cross pad, the Standard Abrasives™ Silicon Carbide Slotted Cloth Disc is a good option and provides full coverage. While cross pads are very effective for more aggressive application in coarse grits, the slotted disc works well for less aggressive follow-up steps. The slotted construction makes the disc flexible so that the operator can push it into a hole or tube and achieve full contact with internal diameters. For push-pull applications, a Standard Abrasives™ Overlap Disc is recommended.

Silicon Carbide is a very sharp mineral most commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. It is also an excellent choice for stainless steel applications. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used when a fine scratch pattern is desired.

For the convenience of tool-free disc changes, these slotted discs have either a threaded eyelet arbor hole that screws onto a mandrel and is secured by hand with an attachment bolt, or a built-in 8-32 threaded shaft. A shorter mandrel allows for a steadier application, while a mandrel with extended reach allows access deeper into pipe interiors. Compatible threaded Standard Abrasives™ Mandrels are available separately with thread sizes of 8-32, 3-48, and 14-20. An extended version is available with 8-32 threads.

The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on their broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

• Slotted construction compresses in push applications for full contact with internal radii, holes, and cylinder walls
• Useful for light deburring, polishing, cleaning, blending and chamfering applications
• Super sharp silicon carbide cuts through stainless steel as well as softer surfaces and leaves a smooth finish
• Choose a disc diameter at least 1/2? smaller than the internal diameter of the workpiece
• Cloth backing provides added durability to resist tearing and fraying
• Compatible Standard Abrasives™ Mandrels are available separately