Scotch-Brite™ Clean and Strip XT Pro TN Quick Change Disc, XO-DN, SiC Extra Coarse, Purple, 7 in x 5/8 in-11, 5 ea/Case
Scotch-Brite™ Clean and Strip XT Pro TN Quick Change Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
Take Advantage of High Conformability. With its re-engineered fiber, the Scotch-Brite™ Clean and Strip XT Pro TN Quick Change Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them and works in hard-to-reach areas without damaging the substrate. In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro TN Quick Change Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence. To engineer our Scotch-Brite™ Clean and Strip XT Pro TN Quick Change Disc, silicon carbide mineral is combined with nonwoven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive. Applications include rust removal, paint removal, mill scale removal, coating removal, adhesive removal, and surface preparation.
WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
REENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
DISC ACHIEVES A LARGER CONTACT AREA: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
