Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 4-1/2 in x 5/8"-11, Type 27, 10 ea/Case

Take Advantage of High Conformability

With its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.

Spongy Web, Sharp Mineral

To engineer the Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.

The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.

Applications

Rust removal Paint removal Mill scale removal Coating removal Adhesive removal

Surface preparation

• WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
• REENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
• DISC ACHIEVES A LARGER CONTACT AREA: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
• SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
• CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
• PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
• RECOMMENDED APPLICATIONS: Cleaning, finishing, surface preparation, light scale removal and coating removal
• For industrial/occupational use only. Not for consumer sale or use.