3M™ Trizact™ Cloth Cartridge Roll 237AA, CR-ST, A6 X-weight, 1/4 in x3/4 in x 1/8 in, Straight, 100 ea/Case
| UPC | 00076308897741 |
|---|---|
| 3M ID | 7100101304 |
| Packaging | Case |
- Get up to 15% OFF
- Exclusive Deals and Discounts
- Secure Shopping Experience
- Fast and Friendly Customer Support
3M™ Trizact™ Cloth Cartridge Roll 237AA contains particles of aluminum oxide, which is known for its sharp cut and fine finishing capabilities. This synthetic mineral tackles burrs and defects without gouging or marring the substrate. Moreover, the mineral is adhered to an X-weight cloth backing. X-weight backings are durable and tear resistant, which helps the cartridge roll stand up to edges and contours. The aluminum oxide mineral is resin bonded to the cloth backing, and — as the cartridge roll abrades the surface — the resin breaks down gradually to keep the substrate cool. The cartridge roll features an arbor hole to accommodate a mandrel (sold separately), which attaches to a die grinder.
When you find yourself in a corner, trust 3M™ Trizact™ Cloth Cartridge Roll 237AA to help you finish it.
3M Science, Applied with 3M™ Trizact™ Abrasives3M™ Trizact™ abrasives revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Big benefits are achieved through a proprietary 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic – contact for a consistent cut.
- Small, cylindrical shape enables abrasive to access internal diameters
- Aluminum oxide mineral cuts sharp without gouging the substrate
- Resin bond keeps abrasive running cool to help prevent part discoloration
- Trizact™ abrasive features microreplication technology for ongoing, consistent cut
- X-weight cloth backing enhances durability and tear resistance
| 3M ID | 7100101304 |
|---|---|
| Keywords | 3M, Trizact, Cloth Cartridge Roll, abrasive, light deburring, aluminum oxide, microreplication technology, cylindrical shape, internal diameters, X-weight cloth backing, resin bond, part discoloration prevention, sharp cut, fine finishing, durable, tear-resistant, burrs, defects, substrate, die grinder attachment, consistent cut, metalworking, manufacturing, aerospace, transportation, appliance, productivity, throughput, consistent cut. |
| Global Product Hierarchy | Abrasives > Specialty Abrasives > Cartridge Rolls |
| Abrasive Material | Aluminum Oxide |
| Application | Deburring, Finishing, Grinding, Polishing |
| Backing Material | Cloth |
| Backing Weight | X Weight |
| Bond Type | Resin |
| Center Hole Diameter (Imperial) | 0.125 in |
| Center Hole Diameter (Metric) | 3.175 mm |
| Color Family | Gray |
| Grit | Non Pertinent |
| Product Color | Gray |
| Product Number | 237AA |
| Product Type | simple |
| Quantity | 0 |
| Trademark 1 | 3M™ |
| Trademark 2 | Trizact™ |
| Country of Origin | United States |
| SAP Shelf Life In Days | 3650 |
| Base - Billing Unit | ROL |
| Base - Metric Gross Weight | 2.368 G |
| Base - Metric Height Dimension | 0.00317 M |
| Base - Metric Length Dimension | 0.019 M |
| Base - Metric Width Dimension | 0.006 M |
| Base - Item Quantity | 1 |
| Base - Unit | ROL |
| Unit of Use - Billing Unit | ROL |
| Unit of Use - Customary Cubic Dimension | 2.295652229099734 ci |
| Unit of Use - Customary Gross Weight | 0.005220546368537901 lbs |
| Unit of Use - Customary Net Weight | 0.002998286765714335 lbs |
| Unit of Use - Metric Cubic Dimension | 37.619 CCM |
| Unit of Use - Metric Net Weight | 1.36 G |
| Unit of Use - Item Quantity | 1 |
| Unit of Use - Total Unit Quantity | 1 |
| Unit of Use - Previous Packaging Level Quantity | 1 |
| Unit of Use - Item Unit | EACH |
| Unit of Use - Unit | ROL |
| Shipper - Billing Unit | ROL |
| Shipper - Customary Cubic Dimension | 229.5638193638592 ci |
| Shipper - Customary Gross Weight | 0.5219995212882439 lbs |
| Shipper - Customary Net Weight | 0.29982867657143353 lbs |
| Shipper - Customary Height Dimension | 6.181102362204724 in |
| Shipper - Customary Length Dimension | 6.417322834645669 in |
| Shipper - Customary Width Dimension | 5.78740157480315 in |
| Shipper - Metric Cubic Dimension | 3761.877 CCM |
| Shipper - Metric Weight | 236.775 G |
| Shipper - Metric Net Weight | 136.0 G |
| Shipper - Metric Height Dimension | 0.157 M |
| Shipper - Metric Length Dimension | 0.163 M |
| Shipper - Metric Width Dimension | 0.147 M |
| Shipper - Item Quantity | 100 |
| Shipper - Total Unit Quantity | 100 |
| Shipper - Previous Packaging Level Quantity | 100 |
| Shipper - Previous Packaging Level Unit | EACH |
| Shipper - Item Unit | EACH |
| Shipper - Unit | CS |
| Pallet - Billing Unit | ROL |
| Pallet - Customary Cubic Dimension | 97515.94306338219 ci |
| Pallet - Customary Gross Weight | 222.66688480672636 lbs |
| Pallet - Customary Net Weight | 107.03883753600176 lbs |
| Pallet - Customary Height Dimension | 48.4 in |
| Pallet - Customary Length Dimension | 48.0 in |
| Pallet - Customary Width Dimension | 42.0 in |
| Pallet - Metric Cubic Dimension | 1.598 M3 |
| Pallet - Metric Net Weight | 48.552 KG |
| Pallet - Metric Height Dimension | 122.936 CM |
| Pallet - Metric Length Dimension | 121.92 CM |
| Pallet - Metric Width Dimension | 106.68 CM |
| Pallet - Item Quantity | 35700 |
| Pallet - Total Unit Quantity | 35700 |
| Pallet - Previous Packaging Level Quantity | 357 |
| Pallet - Previous Packaging Level Unit | BOX |
| Pallet - Item Unit | EACH |
| Pallet - Unit | PAL |
| Pallet - Pallet Layer Quantity | 7 |
| Pallet - Shipping Container Per Layer Quantity | 51 |