3M™ Speedglas™ 100 Welding Helmet 07-0012-31BL/37232(AAD), with ADF 100V, 1 EA/Case

The 3M Speedglas Welding Helmet 100 comes in black with Auto-Darkening Filter 100V and is good for MMAW, TIG>10A, MIG, tack, and arc welding as well as a grinding mask. The welding helmet allows you to make multiple adjustments to the helmet and headband for optimal comfort and uses a lightweight design of only 15.5 ounces. It has user-selectable dark shades 8 through 12, light shade 3 and a viewing area of 1.7 inches x 3.7 inches. It has three sensitivity levels for reliable arc detection. Permanent UV/IR protection shade 12. ADF battery life of 1500 hours. 2 arc sensors. ANSI Z87.1-2010 and CSA Z94.3 approved. Classification (perEN 379) 1/2/2/2. This welding helmet can be used in conjunction with many reusable and maintenance-free respirators. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• AUTO DARKENING FILTER — Advanced optics adjust nearly instantly after detecting welding arc to maintain optimal welding view
• THREE LENS SENSITIVITY SETTINGS — Allows this welding helmet to be used for most types of welds
• USER-SELECTABLE DARK SHADES — Enables welder to have an enhanced view of work area
• READY TO USE — Welding helmet comes fully assembled.
• ANSI Z87.1-2010 — Approved for eye and face protection.
• ANSI Z89.1 — Approved when used with an appropriate hard hat
• CSA Z94.3 — Approved
• For Industrial/Occupational Use Only — Not for consumer sale or use.