3M™ Secure Click™ Quantitative Fit Test Adapter Kit HF-800-03, 1 EA/Case
Use the 3M™ Secure Click™ Quantitative Fit Test Adapter Kit HF-800-03 to conduct quantitative fit testing on 3M™ Secure Click™ Half Facepiece Reusable Respirator HF-800 Series.
Use the 3M Secure Click Quantitative Fit Test Adapter Kit HF-800-03 to conduct quantitative fit testing on 3M Secure Click Half Facepiece Reusable Respirator HF-800 Series. The 3M HF-800-03 consists of a fit test head harness assembly and fit test adapter with port that is installed on a 3M HF-800 Series Respirator. Fit test adapter is installed where the speaking diaphragm is normally assembled. Tubing can then be inserted onto the fit test port. After performing the quantitative fit test, remove all parts of the 3M HF-800-03 and reassemble the 3M HF-800 Series Respirator per the User Instructions prior to using in a contaminated environment. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
CONDUCT FIT TESTING: This kit is used to conduct quantitative fit testing on 3M Secure Click Half Face Respirators HF-800 Series
DESIGNED FOR USE WITH 3M Secure Click Half Face Piece Reusable Respirator HF-800 Series which offers better breathability, unique filter/cartridge connection, and push button seal check.
INCLUDES head harness assembly and fit test adapter with port
NOT INCLUDED: Secure Click HF-800 Series Respirator and Cartridges/Filters no included in this kit
