3M™ Scotch-Weld™ Structural Plastic Adhesive 8010, Blue, Part B, 5 Gallon (Pail), Drum

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics

Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. This adhesive is formulated with 8 mil spacer beads for bond line spacing.

Recommended Applications

Joining plastics to metals, such as in the manufacture or repair of appliances
Bonding low surface energy plastics without priming
Impact resistance composite bonding
Manufacture or repair of various sporting goods equipment
Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

3M™ Scotch-Weld ™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72°; F /22°; C).

Easy Adhesion with Acrylic

Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

• KEY SUBSTRATES: Joins a variety of low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPOs without special surface preparation
• RECOMMENDED APPLICATIONS: Creates long-lasting bonds across the electronics, transportation, and construction industries
• EXTREMELY STRONG: Can replace mechanical fasteners, screws, rivets, and spot welds in many applications
• LESS PREP TIME: Made to function with little to no surface preparation
• AMPLE OPPORTUNITY FOR REPOSITIONING: Offers up to 10 minutes for project readjustment
• FULL CURE TIME: Fully cured in 48 hours at 73 °F (23 °C)