3M™ Scotch-Weld™ Low Viscosity Air/Hydraulic Sealant HP42, Brown, 50 mL Bottle, 10/case

Cures Quickly to Seal Hydraulic and Pneumatic Pipes and Fittings

3M™ Scotch-Weld™ Low Viscosity Air/Hydraulic Sealant HP42 is a one-component, anaerobic sealant that cures and seals hydraulic and pneumatic pipes and fittings. This general purpose, low viscosity pipe sealant is fast-curing, sealing almost instantly. It is formulated to resist pressure and vibration as well as lock and seal medium to coarse straight and tapered threads.

Recommended Applications

Pressure vessels
Air compressors
Hydraulic and pneumatic systems

Features of a Rapid Seal

3M™ Scotch-Weld™ Low Viscosity Air/Hydraulic Sealant HP42 provides an almost instant low-pressure seal. A high-pressure seal results when the bond is fully cured. It seals quickly to stop leaks when applied to threads or compression fittings of most metal and certain plastic pipes, without shredding, evaporation or shrinkage. In addition, this sealant prevents galling as well as helps eliminate the waste and mess of leaking hydraulic fluids, oil, fuel and lubricants.

Formulated for Speed and Strength

Offering a rapid seal that withstands heat, pressure and vibration, 3M™ Scotch-Weld™ Low Viscosity Air/Hydraulic Sealant HP42 is an excellent solution for fast results. Resilient and durable, this pipe sealant is formulated to produce the strong seal necessary for a wide variety of demanding applications.

Understanding Anaerobic Adhesives

Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross-linked plastic that provides aggressive adhesion with effective shear strength.

More commonly referred to as threadlockers, pipe sealants, retaining compounds, and gasket makers, these adhesives are often used to enhance the seal, or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy-to-dispense, cure rapidly, and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown, and reduce warranty claims.

• Cures quickly to seal hydraulic and pneumatic pipes and fittings
• Prevents leaks and corrosion in pipes by strengthening bonds between pipe threads
• Features temperature resistance to 300ºF (149ºC)
• Designed to resist pressure and vibration, providing long-term durability