3M™ Hot Melt Palm Trigger 9761, for TC Applicator, 10 Each/Case

A heavy, metal stand designed to provide added convenience for 3M™ Hot Melt Applicator EC, 3M™ Hot Melt Applicator TC or 3M™ Hot Melt Applicator LT. This benchstand features a heavy duty metal base and a lightweight armature designed to store applicators when not in use. This helps reduce operator fatigue and provides a safe storage location.

A heavy, metal stand designed to provide added convenience for 3M™ Hot Melt Applicator PG II or 3M™ Hot Melt Applicator PG II LT. This benchstand features a heavy duty metal base and a lightweight armature designed to store applicators when not in use. This helps reduce operator fatigue and provides a safe storage location.

A special assembly that optimizes productivity by holding 3M™ Hot Melt Applicator PG II or 3M™ Hot Melt Applicator PG II LT in a 45º position for hands-free adhesive application. This step-saving system allows one worker to concentrate on joining the material while minimizing fatigue from positioning the applicator before and after each step. Mount includes bracket, stand and nozzle assembly.

Directs the adhesive flow from 3M™ Hot Melt Applicator PG II or 3M™ Hot Melt Applicator PG II LT straight down when used in conjunction with the 3M™ Hot Melt Applicator Bench Mount. This ergonomic downward orientation makes hands-free assembly even easier. The kit includes adapter, valve, standards 0.093" tip and heat resistant bag.

Provides hands-free, high-capacity operation of 3M™ Hot Melt Applicator PG II or 3M™ Hot Melt Applicator PG II LT when used in conjunction with 3M™ Hot Melt Applicator Bench Mount.

Adds comfort and efficiency when applying hot melt adhesive with 3M™ Hot Melt Applicator TC or 3M™ Hot Melt Applicator LT. Must be used in tandem with the 3M™ Quadrack™ Converter 9275 to form a complete system. Durable trigger is shaped for a natural grip.

Adds Quadrack™ capabilities to standard 3M™ Hot Melt Applicator TC or 3M™ Hot Melt Applicator LT. This converter increases the loading capacities to these applicators, maximizing working time and reducing frequent reloading upon exhausting shorter hot melt material. Must be used in tandem with the 3M™ Hot Melt Applicator TC Palm Trigger 9761 to form a complete system.

A nozzle and valve designed to increase productivity to 3M™ Hot Melt Applicator TC, 3M™ Hot Melt Applicator EC or 3M™ Hot Melt Applicator LT by providing a precise and controlled flow of hot melt adhesive. (Valve Assembly comes installed on 3M™ Hot Melt Applicator TC, 3M™ Hot Melt Applicator EC and 3M™ Hot Melt Applicator LT.

3M™ Hot Melt Applicators, also referred to as "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250ºF / 121ºC and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380ºF / 193ºC and can dispense adhesives that produce a stronger bond than low-temperature adhesives.

Melted 3M™ Hot Melt Adhesive is extruded through the nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.

In the 3M Industrial Adhesives and Tapes Division, they apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, their technologies help customers like you deliver competitive products to the market faster and more efficiently.

• Offer added convenience
• Help optimize productivity
• Allow for hands-free operation
• May help reduce operator fatigue
• Increases load capacity
• Provides precise flow of adhesive