3M™ Trizact™ Hookit™ Foam Disc 02087, 3 in, P3000, 15 Discs/Carton, 4 Cartons/Case

You'll see long abrasive life and consistent finishes thanks to the patented 3M™ Trizact™ Abrasives. They are built with our unique three-dimensional structures which wear to reveal fresh, sharp abrasive mineral.

3M™ Trizact™ Hookit™ Foam Abrasive Disc 3000 can reduce the risk of heavy swirl marks which can be introduced during aggressive compounding. Used damp, they deliver the anti-loading benefits of wet sanding without the productivity-reducing hydroplaning which can happen when power sanding on overly-wet surfaces.

The foam backing provides plenty of control and consistent contact with the surface - great for preserving orange peel. Can be used with a soft interface pad for added conformability over curved surfaces.

When used with other 3M™ Trizact™ abrasives and one of the 3M™ Perfect-It™ Paint Finishing Processes, they can reduce overall polishing time.

3M™ Trizact™ Hookit™ 3000-grade Foam Abrasive Discs are available in 3-, 5-, and 6-inch diameter discs and 2 3/4 x 5 1/2-inch sheets.

• Reduce the need for aggressive compounding with 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs for paint finishing.
• These 3000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs help increase shop productivity by eliminating the need for aggressive wool compounding pads and reducing polishing time.
• Compared to traditional buffing, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of swirl marks, burn through, and other defects caused by more aggressive processes.
• 3M™ Trizact™ abrasives have unique three-dimensional abrasive structures which are distributed across the abrasive surface. As the structures wear, fresh mineral is exposed, delivering consistent finishes and longer disc life.
• They help refine curly Q's, pigtails, and other inconsistent sand scratches.
• Used damp, they deliver long life and less loading than dry sanding.
• Foam backing provides plenty of control and consistent contact with the surface –great for preserving orange peel.
• Allows technicians to refine paint scratches using a lighter dual-action sander instead of a heavier polisher.
• When used with other 3M™ Trizact™ abrasives and a 3M™ Perfect-It™ Paint Finishing system, they can reduce overall polishing time.
• When using a dual-action sander, make at least five passes with 50% overlap.
• Available in 3-, 5-, and 6-inch diameter discs as well as 2 3/4 x 5 1/2-inch sheets.