3M™ PPS™ Series 2.0 Vented Spray Cups Kit 26264, Large (32.1 fl oz, 950 ml), 200 Micron Filter, 1 Kit/Case

3M™ PPS™ Series 2.0 Vented Cup Kits deliver the consistent flow you expect from a vented cup system. With pre-installed vents and the built-in filters in the lids there's no assembly like some other brands' vented cup kits. The built-in valve is pre-set to the closed position – it's ready to be used right out of the box. Once attached to a spray gun and in use, the vent valve is marked with large, easy-to-see icons clearly indicate whether the vent is open or closed. You get a clean cup every time, no reusing hard cups. Cups can be used for temporary storage of unused paint. The easy-to-assemble, screw-fit lids deliver a robust, leak-free connection to cups. 3M™ PPS™ Series 2.0 Vented Cups use the same connection to your spray gun as our 3M™ PPS™ Series 2.0 Linered Cups, meaning you can seamlessly switch from one cup type to the other. 3M™ PPS™ Series 2.0 Vented Cup Kits include everything you need to mix, spray, and temporarily store paints and coatings: 50 cups, 50 lids, and 32 sealing plugs. 3M™ PPS™ 2.0 Vented Cups can be used for temporary storage of leftover coatings, simply use the included sealing plugs. With two filter sizes and five cup varieties, you can match your cup to your job. Kits are available in four sizes: 950mL Large, 700mL Standard, 400mL Midi, and 250mL Mini – plus a 700mL Standard sized UV Kit – all with your choice of 125- or 200-micron filters. Part of the Full 3M™ PPS™ Family The 3M™ PPS™ family of products has helped painters save time, reduce solvent use, and deliver consistent results for more than 20 years. From the world's first linered cup system, the PPS™ family has grown to include a family of paint cups that meet painters' everyday challenges. From the 28-ounce big-job-tackling Large Cup, to the 3-ounce Micro liner for spot repair jobs, there's a PPS™ tool for virtually every job. • Traditional PPS™ Linered Cups Available in four sizes, with two filter options and five liner sizes to let painters customize their setup for maximum efficiency and minimal material usage. Traditional PPS lets painter spray from any angle, even upside down. • PPS™ Vented cups - Available in four sizes with two filter options, the deliver the consistent material flow you'd expect from a vented cup system. Their filters and the cup vent are pre-installed, saving setup time on each job. PPS™ Series 2.0 Adapters With more than 40 adapters available, virtually any gravity-fed spray gun can be converted to use the full PPS™ family of products. Find the right adapter for your gun at: 3MCollision.com/PPS • PPS™ UV Cups Available in both linered and vented cup options for PPS™ Series 2.0 , they let you spray light-sensitive materials with confidence. PPS™ Pressure Cups let you spray thick, high-viscosity coatings like undercoating, bedliner, and marine gelcoat with ease.

• Instantly ready to use, 3M™ PPS™ 2.0 Vented Cup Kits, Large Size, come with their valves and 200 micron filters pre-installed. The 32.1 fl oz (950 ml) capacity cups are ready to start mixing right out of the box.
• They deliver the consistent material flow you’d expect from a vented cup system.
• The rigid cup allows you to have a clean cup every time with no reused components. Lets you temporarily store any leftover coatings with confidence.
• Large Vented cups have a capacity of 32.1 fl. oz. (950 ml) and are suitable for high-volume jobs like 4-panel repairs.
• Uses 3M™ PPS™ Series 2.0 cup connection so you can spray vented cup and traditional 3M™ PPS™ Series 2.0 cups with the same spray gun – with no cumbersome setup. The stable PPS Series 2.0 four-point snap connection means there are no threads to wear out.
• From the big-job-dominating 950mL Large cup to the 250mL Mini cups – there are four sizes of the 3M™ PPS™ Series 2.0 vented cups let you pick the right sized cup for the job, promoting cost-effective workflows.