3M™ PPS™ Series 2.0 Vented Cups are ready to use – allowing you to mix, spray, and temporarily store paints and coatings from the same cup. They come with their valves installed and closed to help prevent accidental leaks while filling. Use with any spray gun equipped to use 3M™ PPS™ Series 2.0 Cups.
3M™ PPS™ Series 2.0 Vented Cups can save painters time on every setup. The pre-installed air vent means there is virtually no assembly, unlike some other cups. The built-in valve is pre-set to the closed position, so there's less risk of accidental leakage while you fill the cup. Once attached to a spray gun and in use, the vent valve is marked with large, easy-to-see icons so you'll know whether the valve is open or closed. 3M™ PPS™ Series 2.0 Vented Cup system delivers the excellent material flow you’d expect from a vented system. 3M™ PPS™ Series 2.0 Vented Cups and Lid use the same spray gun connection as the legendary 3M™ PPS™ Series 2.0 Lindered Cups, meaning painters can use the industry's most-versatile family of cups and filters without cumbersome changes to their spray gun. The easy-to-assemble, screw-fit connection delivers a robust, leak-free connection to lids. Part of the Full 3M™ PPS™ Family The 3M™ PPS™ family of products has helped painters save time, reduce solvent use, and deliver consistent results for more than 20 years. From the world's first linered cup system, the PPS™ family has grown to include a family of paint cups that meet painters' everyday challenges. From the 28-ounce big-job-tackling Large Cup, to the 3-ounce Micro liner for spot repair jobs, there's a PPS™ tool for virtually every job. • Traditional PPS™ Linered Cups Available in four sizes, with two filter options and five liner sizes to let painters customize their setup for maximum efficiency and minimal material usage. Traditional PPS lets painter spray from any angle, even upside down. • PPS™ Vented cups - Available in four sizes with two filter options, the deliver the consistent material flow you'd expect from a vented cup system. Their filters and the cup vent are pre-installed, saving setup time on each job. PPS™ Series 2.0 Adapters With more than 40 adapters available, virtually any gravity-fed spray gun can be converted to use the full PPS™ family of products. Find the right adapter for your gun at: 3MCollision.com/PPS • PPS™ UV Cups Available in both linered and vented cup options for PPS™ Series 2.0 , they let you spray light-sensitive materials with confidence. • PPS™ Pressure Cups let you spray thick, high-viscosity coatings like undercoating, bedliner, and marine gelcoat with ease.
Instantly ready to use — these Midi Size 3M™ PPS™ 2.0 Vented Cups have a capacity of up to 13.5 fl oz (400 ml) and come with their valves pre-installed. They're ready to start mixing right out of the box, delivering the excellent material flow you’d expect from a vented cup system.
These firm-but-flexible disposable cups allow you to have a clean cup every time with no reused components. Paired with their matching lid, they let you temporarily store any leftover coatings with confidence.
The cup's valve is pre-attached in the closed position. Once attached to a spray gun and in use, the vent valve is marked with large, easy-to-see icons clearly indicate whether the vent is open or closed.
Midi Vented cups have a capacity of 13.5 fl. oz. (400 ml) and are suitable for jobs like bumpers and 2-panel repairs.
Clear cups are printed with mix ratio charts which allow you to mix paint in the cup.
3M™ PPS™ 2.0 Vented Cups are available more sizes than any other brand: 950mL Large, 700mL Standard, 400mL Midi, and 250mL Mini – plus a 700mL Standard-sized UV cup. Available lids offer your choice of 125- or 200-micron filters.
Easy-to-assemble screw-fit lids deliver a robust, leak-free connection to cups.
