3M™ PPS™ Disposable Lids, 16200, Standard and Large, 200 Micron Filter, 25 lids per case
3M™ PPS™ Lids come in cases containing 25 lids, each with a welded-in filter to strain coating material while spraying, for use with the 3M™ PPS™ paint preparation system. Two Lid sizes are available for a range of jobs large (fit with standard and large cups and liners) and small (fit with Midi cups and liners).
Use 3M™ PPS™ Standard/Large Disposable Lids with the original PPS™ spray gun system for an all-in-one solution for measuring, mixing, filtering and spraying paint materials. Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials. Unlike with conventional aluminum or other metal paint cup systems, with PPS™ you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. Simply place a liner in the reusable paint cup, mix the paint, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. And you can increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. Specially designed PPS™ stainless steel metal adapters let you use the PPS™ system with virtually any spray gun. Pack of 25 standard/large lids with 200-micron filter.
360 DEGREE PAINT RANGE – System design allows you to consistently spray at any angle, even upside down
