3M™ PPS™ Collar 16345, Midi (13.5 fl oz, 400 mL), 75 Collars/Case

Designed specifically for use with the 3M™ Paint Preparation System, these Midi (13.5 oz.)-sized 3M™ PPS™ Collars twist on to from a tight seal between PPS™ Cups and PPS™ Lids for optimized spray performance. They also help support disposable 3M™ PPS™ Liners, reducing accidental leakage into reusable cups. The Midi size suits a range of jobs.

These 3M™ PPS™ Collars are sold in bulk (75 Collars per box). They are also available pre-matched with corresponding Midi-sized 3M™ PPS™ Cups.

Unlike conventional paint cup systems, 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.

After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer and local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing up to a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

• Designed for use with 3M™ Paint Preparation System, PPS™
• Twist-on collars complete the connection between PPS™ Cups, Lids and Liners
• Midi (13.5-oz.) size suits a range of spray paint and coating jobs
• Also available as part of sets with PPS™ Cups
• 3M™ PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
• System enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)
• All-in-one solution reduces the chance of outside contamination and reduces paint consumption
• Reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time up to 50%
• System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use